TMC Groups and Cars
At Tongham we not only race the SEGTO classes at each meeting, we also run two of our own formulas, Nudge and Spin contact class and a Novice Junior class. For more details and up to date rules please check the downloads section or visit the SEGTO website.
Juniors & Novice Juniors
- For the younger drivers – 10 to 16 years old with little or no racing experience (note: to be eligable for the SEGTO championship the minimum age is 12 years)
- Novice Juniors are permitted to carry a responsible adult in the passenger seat
- The build specs are the same as ‘Production A’ class with some exceptions such as no locked differentials, additional roll cage requirements, etc.
Production A
- Maximum engine capacity: 1,000cc FWD or 1,100cc RWD
- OHV, OHC and single point injection engines subject to homologation list
- 0.060″ (or metric equivalent) overbore permitted
- Any carburettors or injection must be as per manufacturers specification/supply
- ECU’s if used MUST be of manufacturers supply and unmodified with original stickers and markings visible and unmodified
- Locked differentials ARE permitted, limited slip differentials are NOT
- Shock absorbers may be uprated, coilover shock absorbers are only permitted if they are fitted as standard by the manufacturer
- Maximum tyre width: 175mm with relevant markings to show they are suitable for road use
Production B
- Maximum engine capacity: 1,300cc FWD or RWD
- OHV, OHC and single point injection engines subject to homologation list
- 0.060″ (or metric equivalent) overbore permitted
- Any carburettors or injection must be as per manufacturers specification/supply
- ECU’s if used MUST be of manufacturers supply and unmodified with original stickers and markings visible and unmodified
- Locked differentials ARE permitted, limited slip differentials are NOT
- Shock absorbers may be uprated, coilover shock absorbers are only permitted if they are fitted as standard by the manufacturer
- Maximum tyre width: 185mm with relevant markings to show they are suitable for road use (with the exception of Yokohama A-021R tyres)
1450 Hot Rods
- Maximum engine capacity: 1,450cc FWD or RWD with engine over the driven axle
- Modified shells/space frames permitted
- Single engine only
- Multi valve engines permitted
- Engine modifications are free (no turbocharging, supercharging, or other forced induction permitted)
- Suspension and all other modifications are free
- Tyres are free (to a maximum rim width of 10″ wide)
Super Saloons
- Maximum engine capacity: unlimited
- Modified shells/space frames permitted
- Twin engine drive is permitted
- Multi valve engines permitted
- Engine modifications are free
- Suspension and all other modifications are free
- Tyres are free (to a maximum rim width of 10″ wide)
Nudge and Spin
- A “nudge and spin” style formula with limited contact permitted
- Engine capacity and build spec may vary at some meetings so it is advisable to contact the ‘Rookie Rep’ to check what will be racing and when
Specials
- Unlimited engine capacity
- Any non-production car with open wheels, with any drive configuration
- Unlimited modifications
- Single or twin engines
Thunder Rods
- Engine capacity: over 1600cc FWD or RWD
- ‘H’ frame cages permitted
- Standard suspension
- All glass to be removed and windscreen to be replaced with 25mm (1″) square mesh
- Drivers window to have a window net
- Original fuel tank to be removed and replaced with a maximum 2 gallon tank in a box or behind a fire wall
- Isolator switch must be fitted on drivers side rear window and clearly marked on/off
- Original seats may be used
- Dashboard to be left in
- Wheel size can vary but tyre width must stay as standard
